Loading... Please wait...

AC Stop Leak | Directions

49496-directions.png

Directions | Red Angel AC Stop Leak | Part #49496

  1. Locate the A/C low side service port.
  2. Start Engine and turn A/C to maximum cooling.
  3. Fill A/C oil injector with 2oz. of Red Angel A/C Stop Leak and connect to the low side service port while you recharge the system with the appropriate amount of refrigerant.
  4. Allow A/C system to run for 15 minutes to circulate Red Angel and seal all leaks.

Not recommended for systems that cannot hold 5 inches of vacuum for 25 minutes or 15 inches of vacuum for 5 minutes. Also not recommended for systems that lose more than 1 pound of refrigerant per day or leaking compressors. Not for use in electrically driven compressor systems.

CAUTION: Avoid contact with skin. Keep out of reach of children. Always use protective eyewear.

DISPOSAL: In accordance with all local, state and federal regulations.

If you have further questions in regards to the proper application of this product, please call 1.888.863.0426 to speak with our Tech Department.

BACK TO PRODUCT